- Startseite
- Watts
- Rückflussverhinderer
- Deringer 50/50G Lightweight Stainless Steel Reduced Pressure Detector Type II Assembly Backflow Preventers

Deringer 50/50G Lightweight Stainless Steel Reduced Pressure Detector Type II Assembly Backflow Preventers
Ames Deringer™ 50 and 50G Reduced Pressure Detector Type II Assemblies are designed to prevent hazardous contaminants and non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions. The Type II bypass is used to monitor unauthorized water usage and is primarily required on fire sprinkler systems. Both models can be installed under continuous pressure service. • Integral shutoffs for shorter lay length and lightweight construction (Deringer 50 only) • Bow-seal™ full access cover for lower weight and easy access to valve internals • Dual-action check module for low- and high-flow performance • Tamper-resistant test cocks • Type II bypass for lower weight and simplified testing • Optional flood sensor connection kit to detect flowing discharge from the relief valve; provides dry contact output for BMS integration
Auf der Herstellerseite ansehenTechnische Daten
| Product Line | Ames Fire & Waterworks |
|---|---|
| Body Material | Stainless Steel |
| Maximum Working Pressure | 175 psi (12 bar) |
| Connection Size | 2 1/2 IN, 3 IN, 4 IN, 6 IN, 8 IN |
| Connection Type | Flanged Joint, Grooved Joint |
| Inlet Shutoff Valve Type | Gear Operated Butterfly Valve, Outside Stem And Yoke Gate Valve |
| Technologies | Flood Detection |
Technische Dokumente
Dokumente werden von der offiziellen Website des Herstellers geöffnet.
Installations-, Betriebs- und Wartungsanleitungen
- Maintenance Manual - Deringer Gear Box ReplacementPDF
- Maintenance Manual - Deringer Gear Box WiringPDF
- Maintenance Manual - Deringer Indicator FlagPDF
- Maintenance Manual - Deringer Models 30/50 Only - Bypass Testing USC - Sizes 2 1/2-4 INPDF
- Maintenance Manual - Deringer Tamper SwitchPDF
- Maintenance Manual - For Deringer Models 40/50 - Sizes 6 and 8 IN, For Models 40X/50X - Sizes 4 and 6 INPDF
- Maintenance Manual - For Deringer Models 40/50 Only - Sizes 2 1/2-4 INPDF
- Maintenance Manual - For Deringer Models 40G/50G - Sizes 6 and 8 IN, For Models 40GX/50GX - Sizes 4 and 6 INPDF
- Maintenance Manual - For Deringer Models 40G/50G Only - Sizes 2 1/2-4 INPDF
- User Guide - For All Deringer Series ValvesPDF
Verkaufsunterlagen
Anwendungsbereiche
- Potable water supply systems
- Fire sprinkler systems
Häufig gestellte Fragen
Aus welchem Werkstoff besteht dieses Modell?
Body Material: Stainless Steel.
Welche Druckstufe hat dieses Modell?
Maximum Working Pressure: 175 psi (12 bar).
Welche Anschlussgrößen sind erhältlich?
Connection Size: 2 1/2 IN, 3 IN, 4 IN, 6 IN, 8 IN.
Wo finde ich Datenblatt und Katalog als PDF?
Im Abschnitt „Technische Dokumente“ auf dieser Seite; die Dokumente öffnen sich auf der offiziellen Website des Herstellers.
Wie erhalte ich ein Preisangebot für dieses Produkt?
Füllen Sie das Angebotsformular unten auf dieser Seite aus oder rufen Sie +90 322 235 22 35 an. Gookir Global ist Watts-Vertragshändler in der Türkei.
Angebotsanfrage
Preisangebot für dieses Produkt anfordern
Hinterlassen Sie Ihre Kontaktdaten. Unser Vertriebsteam prüft Stückzahlen, Lieferzeiten sowie die technische Eignung und erstellt ein maßgeschneidertes Angebot.
Deringer 50/50G Lightweight Stainless Steel Reduced Pressure Detector Type II Assembly Backflow Preventers
