- Startseite
- Watts
- Rückflussverhinderer
- 909RPDA Reduced Pressure Detector Assembly Backflow Preventers with Flood Sensor, Cast Iron, 2 1/2 - 10 IN

909RPDA Reduced Pressure Detector Assembly Backflow Preventers with Flood Sensor, Cast Iron, 2 1/2 - 10 IN
Series 909RPDA Reduced Pressure Detector assembly backflow preventers feature a flood sensor using SentryPlus Alert® technology to detect continuous discharge from the relief valve. When paired with an add-on connection kit, the sensor relays alerts for potential flooding events via BMS, cellular communication, or the Sensor Control Monitor, which integrates with BAS via RS-485 Modbus or the Nexa® platform through Wi-Fi. This series prevents the reverse flow of contaminated water caused by backsiphonage or backpressure from entering the potable water supply. The 909RPDA incorporates a meter to detect ground leaks and unauthorized illegal taps, reducing annual water expenses. It consists of a coated cast iron body with stainless steel trim, cast iron gate valves, a pressure-differential relief valve, shutoff valves, and bronze ball-type test cocks. The assembly is coated with ArmorTek®, a patented 3-part advanced epoxy coating system designed to limit microbial induced (MIC) and exposed metal substrate corrosion. • Sensor on the relief valve for flood detection • Integrates with the Sensor Control Monitor to deliver maintenance alerts to BAS via RS-485 Modbus or the Nexa platform by Wi-Fi connectivity • Cast iron body construction with patented 3-part ArmorTek® epoxy coating for advanced corrosion resistance • Provide detection point for costly water leaks and illegal taps • Unique two-channel relief valve provides maximum capacity during emergency conditions and stops potential backflow using air-in/water-out principle • Modular design facilitates easy maintenance and assembly • Replaceable stainless steel seats
Auf der Herstellerseite ansehenTechnische Daten
| Maximum Working Pressure | 175 psi (12.06 bar) |
|---|---|
| Body Material | Coated cast iron with stainless steel trim |
| Size Range | 2 1/2 - 10 IN |
| Inlet Connection Size | 2 1/2 IN, 3 IN, 4 IN, 6 IN, 8 IN, 10 IN |
| Outlet Connection Size | 2 1/2 IN, 3 IN, 4 IN, 6 IN, 8 IN, 10 IN |
| Inlet Shutoff Valve Type | No Shutoff Valve, Outside Stem And Yoke Gate Valve |
| Technologies | Flood Detection, SentryPlus Alert®, ArmorTek® |
Technische Dokumente
Dokumente werden von der offiziellen Website des Herstellers geöffnet.
Installations-, Betriebs- und Wartungsanleitungen
- Installation Instructions - 909 Large, LF909 Large, 909RPDAPDF
- Installation Instructions - BMS Flood Sensor Connection KitPDF
- Installation Instructions - BMS Flood Sensor Upgrade - 909, LF909 Large, 909RPDAPDF
- Installation Instructions - Cellular Flood Sensor Connection KitPDF
- Installation Instructions - Cellular Flood Sensor Upgrade - 909, LF909 Large, 909RPDAPDF
- Installation Instructions - Custom Flood Sensor SettingsPDF
- Installation Instructions - Sensor Control MonitorPDF
Verkaufsunterlagen
- Brochure - Backflow Prevention and Flow Control for WaterworksPDF
- Brochure - Backflow Prevention and Flow Control for Waterworks (French)PDF
- Brochure - Backflow Prevention and Flow Control for Waterworks (Spanish)PDF
- Brochure - Backflow Prevention and Flow Control PlumbingPDF
- Brochure - Backflow Prevention and Flow Control Plumbing (French)PDF
- Brochure - Backflow Prevention and Flow Control Plumbing (Spanish)PDF
- Flyer - Flood Detection Connection Kits for 009 and 909 Backflow PreventersPDF
- Flyer - Flood Detection for RPZ/RPDA Backflow Preventers with Flood Sensor (French)PDF
Spezifikationen
- Specification Sheet - 909RPDAPDF
- Specification Sheet - 909RPDA (French)PDF
- Specification Sheet - 909RPDA (Spanish)PDF
- Specification Sheet - Flood Sensor Connection Kit - WattsPDF
- Specification Sheet - Flood Sensor Connection Kit - Watts (Spanish)PDF
- Specification Sheet - Sensor Control MonitorPDF
- Specification Sheet - Sensor Control Monitor (French)PDF
- Specification Sheet - Sensor Control Monitor (Spanish)PDF
Typische Anwendungsbereiche dieser Produktgruppe
- Trinkwasser-Netzanschlüsse
- Löschwasserleitungen
- Bewässerungsanlagen
- Prozessleitungen mit Chemikaliendosierung
Häufig gestellte Fragen
Aus welchem Werkstoff besteht dieses Modell?
Body Material: Coated cast iron with stainless steel trim.
Welche Druckstufe hat dieses Modell?
Maximum Working Pressure: 175 psi (12.06 bar).
Welche Anschlussgrößen sind erhältlich?
Size Range: 2 1/2 - 10 IN.
Wo finde ich Datenblatt und Katalog als PDF?
Im Abschnitt „Technische Dokumente“ auf dieser Seite; die Dokumente öffnen sich auf der offiziellen Website des Herstellers.
Wie erhalte ich ein Preisangebot für dieses Produkt?
Füllen Sie das Angebotsformular unten auf dieser Seite aus oder rufen Sie +90 322 235 22 35 an. Gookir Global ist Watts-Vertragshändler in der Türkei.
Angebotsanfrage
Preisangebot für dieses Produkt anfordern
Hinterlassen Sie Ihre Kontaktdaten. Unser Vertriebsteam prüft Stückzahlen, Lieferzeiten sowie die technische Eignung und erstellt ein maßgeschneidertes Angebot.
909RPDA Reduced Pressure Detector Assembly Backflow Preventers with Flood Sensor, Cast Iron, 2 1/2 - 10 IN
